The Delta shower handles are one of the most popular shower handles in the faucet industry. “Delta” is one of the leading companies in bathroom faucets and kitchen faucets for more than a decade.
But, we all know… Nothing is perfect. And, delta shower handles are not an exception.
Despite being popular in the industry, you may fall into a situation where your shower handle may not work as you would expect them to work. Over time, the lever may start wearing out or get loose or may cause leakage issues in the delta shower handle.
In such cases, you may ask, how to remove delta shower handle? What tools do I need to remove delta shower handle? I’ve delta 1400 series, how do I remove the handle?
Don’t get panic! We’ve got you covered.
If you are curious to know how to remove delta shower handles and faucet handles, this post is going to be the perfect page for you.
With years of experience in this plumbing industry, I’ve fixed various Delta shower handles and Delta faucet handles. I’m gonna teach the exact easiest way that can help you remove delta shower handle without breaking or damaging it.
First, let’s start with the different types of delta shower handles.
Note: If you also own kohler shower handle that want to remove, we have already created a detailed guide on that. Check our How to remove Kohler shower handle step-by-step guide.
Different types of Delta shower handle
To remove delta shower handles, you must know the model of the handle. By knowing which model of delta shower handle you’re using, it will be easier to find the screws’ location.
Various types of delta shower handles are available in the market that differs in handle type and screw location. A few of them have visible screws on the handle’s top and bottom while others may not have screws at all.
Whatever the case is, we are going to check every type of delta shower handle in this section of this post.
Handle Screws That Hide Beneath The Faceplate
Some types of delta faucet handle hide screws beneath the faceplate. The faceplate is a decorative cover that hides the lever’s internal components and bolts.
This hidden fastening system connects the handle to the valve or cartridge.
You can easily access the hidden bolts by removing the faceplate. To remove the faceplate, either pry it or snap it from its mounting place.
Handles With Visible Screws
This is the common type of delta shower handle that follows easy installation and removal. Visible screws are located around the front lever, mostly on the top and bottom.
These screws secure the handle to its valve. Using a screwdriver, you can easily remove the bolts and pull out the handle for repair.
Handles With Plug Buttons
These delta shower handles are known for their screwless design, giving the front lever a sleek and clean appearance. The plug button is a tiny cap or cover made from plastic or metal.
These faucet handles also include bolts hidden behind the front plate. On the other hand, plug buttons are fitted into the screw holes. Simply insert a flat-headed screwdriver or knife into the plug button to remove the attachment.
Gently pry off the cover, and you get access to the fastening screws.
Set Screw Handles
This is another type of delta shower handle available in the market. Set the screw faucet lever attached to the threaded stud or shaft. For this attachment, the handle uses a set of screws.
You can easily remove these small metal bolts using a screwdriver Allen key.
Handles With Threaded Bonnets
Lastly comes delta shower handles with threaded bonnets. This type of faucet handle controls water flow by rotating the knob or lever.
A threaded bonnet is a small cylindrical cap that connects the valve or cartridge inside the handle. This faucet system tightly secures the valve body preventing water leakage issues.
To remove this faucet system, remove the small screw under the handle. In the next step, turn the bonnet and pull it off from the valve body.
How to Remove Delta Monitor Shower Handle
Now comes this major part of this post: How to remove delta shower handle?
For your convenience, we are going to break down the delta shower removal process as per the different-different models.
In this section of this post, we are going to learn how to remove the Delta monitor shower handle.
Step 1: Arrange the tools
First, which is obvious, you should arrange all plumbing tools required to remove delta monitor shower handle.
The shower handle includes various screws, caps, decorative covers, and other components inside that need to be removed. And, to remove them you must have the right set of tools.
Here’re the tools you need for removing delta shower handle:
- Flat-headed Screwdriver according to the screw types.
- Allen wrench.
- Adjustable wrench.
- Drill machine (if needed).
- Handle puller (if needed).
Step 2: Turn off the water supply
In the next step, shut off the water supply valve to complete the task without mess.
This water control knob is near the shower or main home water line. Rotate the knob anticlockwise and ensure the water supply is stopped.
Make sure no water is coming out of the faucet by manually turning the handlebar. Once it’s been ensure that the water supply is completely off, move on to the next step.
Step 3: Find the screw location.
Remember, every Delta shower handle includes screws or fastening bolts inside or outside the faucet. Depending on your model type, locate the screw on your shower handle.
The most common place where you can easily find the screws is the “faceplate” of the delta shower handle. Check every corner of the faceplate to find out the screws.
If you can’t see any screws on the faceplate, you probably have a plug button on the faucet lever. If so, the screws are most probably hidden inside that plug button. To access those screws, you need to first remove the plug button using a plug remover or Allen key.
If you can not see visible screws on the faceplate as well as the lever of the shower handle, threaded bonnet style shower handle. In such cases, you need to remove the threaded bonnet and then you can access the screws.
Step 4: Remove the screws
After locating the screw, pull them off. You can use flat-head screwdriver deadening on bolt type.
Place the tool on screws and rotate it anticlockwise. Carefully pull off the bolts and place them securely so that you can easily find them later. After removing the bolts, you can easily pull off the lever.
Note: Do not put extreme pressure on the threads. Otherwise, it can damage the parts of the shower handle.
Step 5: Pull the cartridge & replace it
For possible repairing or replacement removing the cartridge is vital. Remember, this is a small metal fixture that regulates the water flow in the shower.
Too much pressure or wrong detachment can cause damage to the cartridge. So be careful while removing this component.
How to Remove a Stuck Delta Shower Handle?
Your delta shower handle might have stuck if you’ve been using them for more than 2-3 years. In such cases, a normal screwdriver may not work to remove the screws.
To remove a stuck delta shower handle, you may have to use an additional plumbing tool, like a hammer or a drill machine. Here’s the best way you can do to remove stuck delta shower handle.
Step 1: Find the screws position
As usual, the very first step is to find the screws if they are visible.
According to the shower model, find the screw locations on your faucet. You can start searching screws over the handle top and bottom. Secondly, check the faceplate or decorative cap on the lever.
Pry off the plug buttons; screws may be hidden inside.
Once you’ve found the screws, head hover to the next step.
Step 2: Use lubricants
After finding the screws, you can’t get them off with a simple screwdriver. Over time, nuts and joints became corroded and not easily pulled out.
You first need to lubricate those screws.
Use lubricants while you remove a stuck shower handle. Spray the lubricant over the faucet screws and corroded parts of the delta shower handle.
Leave the solution for a few minutes so that lubrication can reach the bolts and they can get slippery or loose.
Step 3: Use a handle puller or a hammer
If the lubrication doesn’t work to remove the lever, you can try with a handle puller. This is an extreme solution if the faucet lever is too old and heavily stucked.
So grab the handle using a puller tool and rotate, shake, and force it to pull out.
Step 4: Remove the handle
If you follow the above steps correctly, the faucet lever can easily be removed. If not, repeat the lubrication and force the lever to pull out using a hammer.
Using handle puller or a hammer usually get the job done.
Once the screws are off the body, you can remove the handle easily and can complete your shower handle fixing.
How do you remove a Delta shower handle without screws?
Most people wonder how to remove the delta shower handle with no screws. This common type of faucet lever follows a push-fit handle mechanism.
Indeed, these shower handles also include screws but are hidden behind decorative caps or levers. So you have to find the nut’s location to complete the removal process.
Now follow the steps below.
- First, turn off the water flow from its main supply valve. Rotate the supply knob counterclockwise to do the job.
- Use a flathead screwdriver and pop off the cap or handle button. Maybe the screw is located here.
- If you have not found the fastening bolt, gently twist the shower handle to disclose the nut.
- Now you can simply remove the thread using a screwdriver.
- Remove the handle from its base and inspect the valve or cartridge for possible repair or replacement.
Note: By the way, for your help, we have already created a detailed guide on how to remove shower handle without screws. This post will help you fix your shower handle in a step-by-step manner.
Frequently Asked Questions(FAQs)
How do I remove my Delta shower handle?
First, identify the screw location on your delta shower handle. Take a screwdriver and remove the bolts. Then shake, twist, and gently force the handle to pull off.
How do you remove a Delta shower handle without screws?
The Delta shower handle without screws mainly hides the bolts near the faceplate, handle or plug button. Gently pry off the components to get access to the screws. Get the screws off and complete your task.
How do you remove a Delta single-handle faucet handle?
Single-handle faucet handle mostly hides the screws under the push button. So simply push the cover and pull it off. You can find the screw that is located here. Use an Allen key to remove the bolt, and you get access to the main fastening thread.
Conclusion
So this was the detailed guide on How to remove delta shower handle. I hope we answer all your queries related to the topic.
So remember, delta shower handles come in different types and attachments. However, the removal process is somewhat similar in each delta shower handle.
Some faucet levers have push-fit buttons, a few handles secure with screws, and some have hidden bolts. To remove this type of lever, you should identify the screw locations first. Usually, bolts are hidden behind decorative covers, handles, threaded bonnets, plug buttons, and faceplates.
If your shower model has visible screws, you can easily remove them using a flathead screwdriver. So depending on your faucet lever, follow the removal steps. Additionally, you should follow some hacks to remove a stuck handle. For example, removing mineral deposits, using a handle puller, and lubricants.
