If you are the one who is looking for a step-by-step detailed guide on how to remove Meon bathroom faucet handle, this post will help you doing so. This guide is a detailed guide to help you remove moen faucet handles, step-by-step.
Also, every steps discussed in this post caries a picture that better helps you understand the removal process.

It is important to understand that removing moen bathroom faucet handles can be a tricky task, since they come with visible as well as invisible screws. Hence, knowing the right procedure is important in order to successfully remove moen bathroom faucet handle.
And, that’s what this post is all about.
You may like to read: How to remove shower handle?
Different types of Moen bathroom faucet handles

While you go to remove the moen faucet handles, you should know the type of faucet handle you’ve installed in your bathroom. Moen bathroom faucet handles come in different shapes and designs.
There are a few moen faucet handles that come with visible screws while others with no visible screws at all. Addtionally, there are some moen faucet that comes with duble handles while others comes with single handle. And, the process of removing the them is slightly different from each other.
The one that comes with visible screws on it’s body are very easy to remove. All you need to do is keep removing all the screws and you’ll end up having moen bathroom faucet handle in your hand.
However, things gets tricky when the screws are not visible. In such faucets, you need to apply some extra force and a right procedure.
No matter what type of faucet you have, this guide with give you a detailed guide on how to remove moen bathroom faucet handles.
How to remove Moen bathroom faucet handle with screws?
To remove the Moen faucet handle with screws you first need to turn off the water supply by shutting off the valve. Now find the screws which may be visible to you either on top of the handle or beneath the handle. A decorative cap on the handle may hide the screws. Then, use the Allen wrench or screwdriver to loosen the screw and remove it. Keep your screws in a safe place so that you don’t lose them later.
Here’s the step-by-step guide to remove moen bathroom faucet handle with screws:
Step 1: Turn off the water supply

The very first step before you start playing with faucets and handles, turn off the water supply. You can turn off the water supply by shutting off the valve that can be found beneath the faucet. In case there is no shut-off valve beneath the faucet, you may have to turn off the water supply for your whole bathroom or your entire house.
Once the water supply has been turned off, cross-check by rotating the faucet handle.
Step 2: Identify the location of the screw

Once the water supply has been turned off, it’s time to locate the screws to unscrew them. Different models have different locations for screws. However, generally, screws are present on the top of the faucet handle, beneath the faucet handle, or on the base of the faucet handle.
If you can’t find the screws on your Moen faucet handle, you can take help from the manual book as well. The manual book would have a pictorial representation of the Moen faucet handle.
Note: A decorative cap may hide the screws. So, make sure you remove the decorative cap to see the screws properly.
Step 3: Finally, use an Allen wrench or screwdriver to pull off the screws

Once, all the steps are done, use an Allen wrench or screwdriver to loose the screws and remove it. Do not over-force on screws otherwise you may damage your faucet.
If screws are stuck or they are not rotating easily, apply some penetrating oil such as WD-40 to loosen the screws.
How to remove the Moen bathroom faucet handle without screws?
To remove the Moen bathroom faucet handle without screws, start by turning off the valve. Once the water valve is off, try to locate the trim, which is can be easily found on the faucet’s outer body. Then, unscrew the trim by holding the handle with one hand and rotating the trim counter-clock with the other hand. Finally, lift up the handle.
Step 1: Turn off the water valve

Before fixing your faucet, turn off the water valve. Either turn off the water specifically for your bathroom or either the whole house.
Step 2: Locate the trim


Once the water supply has been turned off, locate the trim which is usually canonical, triangular, or cylindrical in shape. Hold the trim steady with one hand and rotate the anti-clock with another hand. You can even use a plier to rotate the trim if it’s stuck. But, be careful while rotating it. Excessive pressure or force can break the trim.
Finally, pull off the trim.
Step 3: Remove the nuts

Finally, once the trim is pulled off, you can see the cartridge. To remove this cartridge, you need to rotate the nut available on the inside of the trim. Usually, it gets off easily if it’s not too much corroded.
Once, all these steps are done, you can do your further fixes whatever you wan to do.
How do you remove a stuck Moen bathroom faucet handle?
One of the main reasons behind a stuck faucet is because of its use for a long period of time. It is stuck because of corrosion or contaminated minerals deposited around it.
You can easily remove it using various methods such as by applying penetration oil or using some hardware tools.
- Turn off the water supply in that area.
- Remove the handle cap using a flathead screwdriver.
- Put some vinegar on the area to get rid of contaminated deposits.
- If the area is affected due to corrosion then, use a bristle brush to clean the area.
- At last, you can apply and force it to make it as it was before.
How to remove the Moen faucet cartridge?
Various Moen faucet manufacturers use cartridges nowadays. When there is any kind of issue with the Moen faucet, one has to remove the cartridge first of all. It is not that hard. One must have various tools such as a cartridge puller, utility knife, pliers, etc.
- Stop the water supply.
- Then, remove the handle off the Moen faucet.
- By using the utility knife, remove the clip of the faucet.
- Now, take out the cartridge.
- Replace it with the new one.
Conclusion
This article, how to remove Moen bathroom faucet handle tries to explain the different ways to remove the faucet handle with or without screws.
Simply speaking, to remove the Moen bathroom faucet handle, first of all, turn off the water supply. Then, locate the screws present on the faucet. Finally, remove the screws with the help of Allen wrench.
If you have a faucet without screws, you first have to remove the trim by holding the base with one hand and rotting the trim anti-clock. Once, that’s done, you can easily see the cartridge that can be removed with the help of plier.
I hope, this was a helpful guide for you.
Frequently Asked Questions(FAQs)
How do you remove a moen faucet handle without visible screws?
By using a flat head screwdriver or pliers and stopping the water supply first of all, then, pulling out the handle straight out. One will be able to remove the moen faucet.
How do you take apart a moen faucet?
They can be removed by using a screwer under the handle to take it out for a faucet without a M-handle design. After that, the top part gets removed, then you can replace the handle as per your wish.
How do you take off the handles of a moen faucet?
There are various faucets which come with handles that can be removed just by removing the screws with the help of screwdriver and pliers after stopping the water supply whereas some come without screws which can be removed just by pulling them out in the direction of their placement.
How do you remove a moen quick connect faucet?
For this, one has to remove the water pressure from it. Then, while removing it, one must compress or hold it. Then, one must put his fingers onto the top of it and release the hose then pull the quick connect moen.
How do I identify my moen faucet model?
For identifying the model available in your house, you have to look at the moen faucet carefully. Then, you have to find out the tag available on it or you can see the model inside the user manual available with you.