The shower handle is an important part of the bathroom as they control the flow of water as well as the temperature of the water. However, over time, the shower handles can wear out or may develop some serious problems, like – leakage, filter issues, etc. In such scenarios, you might consider it to remove the shower handle.
If you are the one who is looking for a step-by-step detailed guide on how to Remove Shower Handle Without Screws, this post will be an easy-to-follow guide for you. Whether you’ve lever style shower handle or a double faucet shower handle, this post will cover almost every type of handle and the step-by-step procedure.
The interesting part? – This post even shows images to better understand the procedure. Every step will have an image to easily understand the step.
If you are in hurry, in short, to remove shower handle without screws, first, turn off the water supply. Then, pop off the cap of the handle to find out the screws and remove them with the screwdriver. At last, remove the handle and clear the dirt and mineral deposited on the surface.
However, just by reading one paragraph, it’s almost impossible to understand the right procedure to remove shower faucet handle with no visible screws. You’ll have to scroll down to better understand it.
Before you move ahead, please note that the same method can also be used to remove kitchen faucet handle without screws.
Sidenote: If you use Moen faucets in your bathroom, we’ve already talked about how to remove moen bathroom faucet handle.
Why you may have to remove shower handle?
Before we directly jump to the remove shower handle, let’s see a few reasons why you may have to remove them.
Most of the time, you don’t need to change the shower handles until there is a serious problem with the shower, like, broken showers, or leakage issues. Some may remove shower handle to clean or replace it.
Here are the few possible reasons why you may need to remove shower handle:
Your shower handle might be broken
It is one of the most common reasons why people remove shower faucet handle with no visible screws. A shower handle may break due to rust accumulated at the joints of other parts.
A broken shower handle will keep leaking water and may increase the unnecessary water bill. In such cases, you have to replace shower handle with the new one.
You might want to change faucet cartridge
It is the most important equipment that controls the water supply through shower handles. It controls the flow of water and if it wears out or breaks down then, your shower handle might keep leaking water.
To repair it, you need to remove faucet handle and fix the cartridge.
To fix leakage
Water leakage from shower valve or shower handle could potentially increase the bills. It also makes the bathroom or kitchen so messy. In such, cases removing shower faucet handle or kitchen faucet handles would be important.
To clean the shower handle
With time shower handle gets dirty and rusty. To avoid any major problems you need to clean the shower handle.
In such cases as well, you might have to remove shower faucet handle without screws.
What are the different types of shower handle?
Before we learn how to remove shower handle without screws, it’s important to understand the type of shower handle you have in your bathroom. Shower handles come in different shapes and designs. And, the process of removing each type is slightly different.
There are 4 common shower handles that most Americans use in their bathroom:
Lever shower handle
These are the most common type of shower handles. To get the water from this type of handle, you need to move the lever up and down. They also have a few additional features, like temperature control.
The lever shower handle has no visible screws. Their screws come hidden under the faceplate. Thus, to remove lever style shower handle, you first have to get the faceplate off and then use the screwdriver to remove the screws.
Knob shower handle
Knob shower handles are similar in structure to door handles. They come in different style shapes, like, globe, jeweled, and squared.
In knob shower handles, you need to circulate the handle clockwise or anti-clock to get turn the water flow on or off.
Knob handles may come with no visible screws or no screws at all. It depends on which brand and model you are using.
Cross shower handle
Cross shower handle are similar to knob handles. These are cross-shaped(X) handles, which you need to rotate to adjust the water supply.
These are old-fashioned handles but can be helpful for people dealing with problems like arthritis.
The cross handles could also have no visible screws or no screws at all. Again, to remove a shower handle without screws, like a cross shower handles, you need to know which brand and model you are using.
Double faucet shower handle
These come with two handles each controlling hot and cold water. They are a combination of cross and knob handles.
They may have hidden screws available in them. Double faucet shower handle have screws under the faceplate before the cartridge.
Tools required to remove shower handle without screws:
Removing a shower handle doesn’t require hardcore plumbing skills. You can easily remove it with the help of the right tools. Here’s the list of plumbing tools you’ll require to remove a shower handle that has no screws:
- Flat screwdriver
- Old cloth
- Allen wrench
- Rust cleaner
- Pliers
You need an Allen wrench in case of lever handlers only; otherwise, you can simply use a screwdriver.
How to remove shower handle without screws?
How to remove a single faucet shower handle without screws?
To remove a single faucet shower handle without screws, first, you have to stop the water supply. Then, pop off the cap to view the screws with the help of a screwdriver. Next, remove the screws carefully and place them in a proper place. Finally, remove the handle.
Here’s the step-by-step guide on how to remove single faucet shower handle without screws:
Step 1: Turn off the water valve
Before removing the shower handle, turn off the water valve. Turn off the water supply for your bathroom. If you don’t have a specific water supply for the bathroom, you may have to stop the water supply for the whole house.
Step 2: Pop off the cap with the help of a flat screwdriver
Once the water supply has been turned off, locate the cap and then the screw which is hiding beneath it.
There are a few shower handles where the screws are not visible even if you remove the cap. In such cases, you might have a twisting shower handle.
If that’s the case with you, twist the handle gently and you should be able to see the screws and the handle should get off.
Step 3: Remove the screws on faceplate
Finally, once the cap is pulled off and you can see the screws, it’s time to remove the screws on the faceplate. To remove the screws, you need to rotate the screws with the help of a screwdriver.
Usually, it gets off easily if it’s not too corroded. In case, the screws are too corroded, you may have to apply extra twisting pressure.
Once you get the screws off, keep them in a safe place so that you don’t lose them.
Step 4: Get the shower handle out
After removing the screws, you can easily remove the shower handle. But, not every shower handle will get off easily. In such cases, use pliers to get the handle out.
How to remove the double faucet shower handle without screws?
To remove the double faucet shower handle without screws, first, close the water supply. Carefully, hold the handle’s arm and twist its base in an anti-clock direction. Thereafter, remove the screws with the help of a screwdriver. Then, access the cartridge for the further process.
Here’s the step-by-step guide on how to remove the double faucet shower handle without screws:
Step 1: Turn the water valve off
Before Starting the process, the first step is to stop the water supply of the valve as we did in the previous case. This helps in unnecessary water leakage or damage to the shower handle.
Step 2: Remove the cap off
Once the water supply has been turned off, locate the handle and use a flat-head screwdriver to get the upper cap off.
Sometimes, handles get corroded due to moisture around it, so, you may have to apply extra pressure.
Step 3: Remove the screws
Once the cap of the handle is removed, you should be able to see the screws. You can use a flat-head screwdriver to get the screws off.
Place the removed screws in a safe place so that you won’t lose them later.
Step 4: Get the cartridge out
Finally, you can get the cartridge out from the handle. However, it could be little thought to get the double faucet cartridge out from the handle. In such cases, a regular socket would work.
Just keep rotating back and forth multiple times, and, eventually, the cartridge would come off the handle.
How to remove lever-style shower handle without screws?
Lever-style shower handles are a little complex in structure, hence, they require much more effort and time as well. First, stop the water supply. Then, you have to locate the button on the handle. Thereafter, remove the button for further process with the help of a flat screwdriver. They have Allen keys rather than screws so you have to remove them with the help of an Allen wrench. Finally, remove the handle carefully.
Step 1: Turn off the water valve
Before Starting the process, the first step is to stop the water supply. Just like we did in previous cases.
Step 2: Remove the cap using Allen wrench
Users will find Allen keys in this type of shower handle instead of regular screws. You can use an Allen wrench to remove the Allen keys from the body.
Once, the Allen keys have been removed, you should be able to take the handle off the body.
Step 3: Remove the cover of the body
Once you have removed the cap from the body, it’s time to remove the cover of the handle. In this case, you don’t have to use any tool. Just use your hand and pull it towards yourself.
It may take some extra pressure, however, it would get off the body.
Step 4: Finally, get the cartridge off the body
Finally, you can use your hand to get the cartridge off the body. And, further you can do whatever you want to do.
How do you remove a bathtub lever handle?
You have to use a flat head screwdriver to remove the plastic cover. Locate the screws beneath it and remove them. After that, remove the handle.
Step 1: Turn off the water supply
Before Starting the process, the first step is to stop the water supply by turning off the valve.
Step 2: Remove the plastic cover
Bathtub lever handles are usually covered with plastic to protect them from any kind of damage. You’ll be able to see the screws very easily.
Once you spot the screws, you need to remove them using a screwdriver.
Step 3: Remove the screws of the handle
See the screws after removing the cover and take them out of the handle carefully. Place them in a safe area so that you can locate them later.
Step 4: Remove the handle
Now take out the handle and clear out all the mineral deposits with the help of rust cleaner and an old cloth. Clean the surface properly.
Frequently Asked Questions(FAQs)
How do you remove a shower faucet handle without a set of screws?
You have to stop the water supply first of all, then pull the cap off the handle with the help of a screwdriver, then remove the handle and remove the mineral deposits with the help of a rust cleaner.
How do you remove a bathtub lever handle?
One requires a proper skill set to remove this type of lever handle. Firstly, you have to close the water supply. Then, remove the plastic cover available on it with the help of a flat head screwdriver.
How to get delta shower handle off?
To remove dealt shower handle, you need to follow similar procedure that we discussed in this post. First, turn off the water supply, then, get the upper body off using an Allen wrench. Next, take the handle off using a screwdriver. Finally, get the cartridge off the body.
How to remove shower plate without screw?
To remove the shower plate, you need to use screwdriver. Insert the screwdriver into to the screws and keep rotating until the screws get off. Finally, use your hand to remove the plate.
How To Remove A Stuck Delta Shower Faucet Handle?
By using screwdriver, hammer, and lubricant you can easily get the stuck shower handle off. You just need to apply an extra pressure to get the handle off the body.
Conclusion
So, in this article, we learned how to remove shower handle without screws. In this post, we learned various type of shower handle and the right procedure to remove them with no visible screws.
However, whatever type of shower handle you are using in your bathroom, whether, lever style, single faucet, or a double faucet, the removal process is almost similar.
All you have to do is, turn off the water valve, remove the upper cap, and use a screw driver to remove the body to access the cartridge.
I hope this post was helpful to you. In case, you think I missed something, the comment section is all your’s. You can even contact me via email or by filling out the contact page.
